Products: powerline

Manufactured in a factory approved to both ISO and automotive TS16949 standards, our Ferrotek® range of drill screws have been designed for optimum performance.

Made from quality hardened steel, the drilling tip is of a special design for quick starting and fast drilling.

Shank ribs and thread notches on the heavy section screws reduce drive torque and remove metal swarf more effectively.

A type 17 (gash point) on the timber screws allow for faster driving with less effort.

Our high performance FerrosealTM coating is an advanced finish, developed in the US for the rigors of the automotive industry.

It exceeds 1000 hour salt spray resistance to ASTM B117 and 15 cycles Kesternich (acid rain) testing.

The coating is a 15-20 micron three part process combining a zinc and aluminium rich system to produce a durable protective finish with self lubricating properties thus reducing heat and drive torque.

Finally the range is packed in colour coded bags for attractive merchandising and is resistant to damp conditions on site whilst minimising packaging waste.

All Ferrotek products are listed below - to view a product, click the title, to close, click the title again.

Drill Screws>>

WC WINGED CSK – LIGHT SECTION & WH WINGED CSK– HEAVY SECTION

powerline drywall screw sharp point
Description:

Countersunk, Phillips recess. No.3 and No.5 self drilling point.
Specification:
  • 4.8 ~ 5.0 dia.
  • Lengths 38mm ~ 85mm (light section)
  • 65mm ~ 109mm (heavy section)
  • 1000hr Ferroseal coating
  • Bag qty: 50 ~ 100
Application:

Timber to steel rails and purlins.

HC HEX HEAD– LIGHT SECTION (no washer) &
HC(G16) HEX HEAD – LIGHT SECTION (With 16mm Galv. Bonded washer)

powerline drywall screw sharp point
Description:

Hexagon washer flange with undercut. No.3 self drilling point.
Specification:
  • 4.8 ~ 5.5 dia.
  • Lengths 16mm ~ 51mm
  • 1000hr Ferroseal coating
  • Bag qty: 100
Application:

Sheet to steel rails and purlins (cold rolled).

HH HEX HEAD– HEAVY SECTION (no washer) &
HH(G16) HEX HEAD – HEAVY SECTION (With 16mm Galv. Bonded washer)


powerline drywall screw sharp point
Description:

Hexagon washer flange with undercut. No.4 and No.5 self drilling point.
Specification:
  • 5.5 dia.
  • Lengths 25mm ~ 100mm
  • 1000hr Ferroseal coating
  • Bag qty: 50~100
Application:

Sheet to steel rails and purlins (hot rolled).

METAL STUDDING SCREWS:
TC TRUSS HEAD, CC PANCAKE HEAD, TH TRUSS HEAD

powerline drywall screw sharp point
Description:

Truss head and pancake head.
Specification:
  • Truss head 4.8 x 16mm No.3pt, 5.5 x 38mm No.5pt
  • Pancake head 4.8 x 25mm 5.5 x 25mm
  • No.3 self drilling point
  • 1000hr Ferroseal coating
  • Bag qty: 100
Application:

Steel to steel.

HS(G16) STITCHING SCREWS (With 16mm Galv. Bonded washer)

powerline drywall screw sharp point
Description:

Hexagon washer flange with undercut. No.1 (reduced) self drilling point.
Specification:
  • 6.3 x 22mm
  • 8.0 x 25mm
  • 1000hr Ferroseal coating
  • Bag qty: 100
Application:

Sheet to sheet.

GENERAL CONSTRUCTION SCREWS
HS CR3, HC CR3

powerline drywall screw sharp point
Description:

Hexagon washer flange with undercut. No.4 and No.5 self drilling point.
Specification:
  • 4.2 x 13mm
  • 4.8 x 16mm
  • 4.8 x 19mm No.2 self drilling point
  • 5.5 x 25mm No.3 self drilling point
  • Cr3 coating
  • Box qty: 500 ~ 1000
Application:

Assembly and fabrication of heating and ventilation systems.

PC COMPOSITE PANEL SCREWS – LIGHT SECTION (With 19mm Galv. Bonded washer)
PH COMPOSITE PANEL SCREWS – HEAVY SECTION (With 19mm Galv. Bonded washer)
PT COMPOSITE PANEL SCREWS – TYPE 17 POINT (With 19mm Galv. Bonded washer)

powerline drywall screw sharp point
Description:

High thread, hexagon washer flange with undercut.
Specification:
  • 5.6dia Lengths 60mm~125mm (light section)
  • 85mm ~ 150mm (heavy section)
  • 60mm ~ 150mm (Type 17point)
  • Bag qty 50 ~ 100
Application:

Composite panel to steel rails and purlins.

HT HEX HEAD SHEET TO TIMBER SCREWS (With 16mm Galv. Bonded washer)

powerline drywall screw sharp point
Description:

Hexagon washer flange with undercut. Type 17 (gash) point.
Specification:
  • 6.3 x 25mm
  • 6.3 x 32mm
  • 6.3 x 45mm
  • 1000hr Ferroseal coating
  • Bag qty: 100
Application:

To suit 5.5 dia. screw.

EPDM WASHERS

powerline drywall screw sharp point
Description:

Galvanised EPDM bonded washer.
Specification:
  • 16mm
  • 19mm
  • 25mm
  • Box qty: 1000
Application:

To suit 5.5 dia. screw.

BIANDITZ MAGNETIC NUT SETTER
powerline drywall screw sharp point
Description:

Magnetic 1/4" Hex. Drive with special lobular hexagon – increases the contact area with the screw head gaining extra grip and lengthening the life of the tool. Lobular profile achieves 20% higher torque than standard hexagon. Manufactured in Spain.
Specification:
  • Available in a wide range of sizes – metric 5mm ~ 17mm and imperial 1/4", 5/16" and 3/8"
  • Length 65mm
  • Individually packed
Application:

Power tool attachment for driving hexagon head fixings.

Other Product Lines

power tool accessories
bmungo fixing

Mungo Range

Extensive ranges of Insulation Fixings, Anchors, Approved Resins from our partners in Switzerland.

MORE

power tool accessories
Autofeed Driver Bits

Multi-Monti® Masonry Anchor

The first screw anchor with ETA Option1 approval.

MORE

powerline
PU Gloves

powerline Gloves

Lightweight PU coated gloves.

Perfect for drylining or general building work... MORE